To be able to connect to METU systems via a modem you should have a user code on that system and a modem. Then you should configure your connection. The following document contains all steps that you need while
configuring your connection on Windows 98.

Click "Network".

Click "Add".

Highlight "Adapter" and then click "Add".

Select "Microsoft" on the left column of the window, and then "Dial-Up Adapter" on the right column.

Click "OK".

Remove "Client for NetWare Networks" (Highlight it, and then click "Remove" button).

Click "Add" and select "Protocol".

Click "Add".

Select "Microsoft" and then "TCP/IP".

Click "OK".

Select "Dial-Up Adapter" in the Network window and then click the "Properties" button. Then select "Bindings" tab.

Unselect "IPX/SPX Compatible Protocol".

Unselect "NETBEUI".

Then from "Advanced" tab, select "Use IPX Header Compression" and value "No". Click "OK".
Then select "TCP/IP", click "Properties" button and select "DNS Configuration". Fill in the blanks as in the following window.

Then click "OK" on the Network window. Your computer will prompt you for disks of Windows95. After copying the necessary files, you should restart your computer.

Then from the "Start/Programs/Accessories/Communications" path on the desktop click "Dial-Up Networking".

If you do not have "Dial-Up Networking" on Accessories, you can install it from "Add/Remove Programs" icon clicking the "Windows Setup" tab (You can access "Add/Remove Programs" from the "ConENGol Panel").

Click on "Make New Connection". Two windows will appear. In the active one, you should make your Windows detect your modem if it was not detected before.

Click "Next" to make Windows detect your modem.

After detection is completed you will see your modem name and type in a new window.

If Windows can not detect your modem, then you should make it manually. To do this select "Don't detect my modem; I will select it from  list", and click "Next" button. Then click "Have disk" button on the new window.

Write anything (for example METU) in the field for the computer name.

Click "Configure…" button and then click "Options" tab.

Select "Bring up terminal windows after dialing".

Click "OK" and then "Next".

Type the "Area-code", "Telephone number" and the "CounENGy code".

2104300 is for academicsi and students in METU.

Click "Next".

Click "Finish".

Click the right mouse button on your connection.

Select "Properties".

Unselect "Use counENGy code and area code" and then click "Server Types" tab.

Make your selections according to the following window.

Unselect "NETBEUI".

Unselect "IPX/SPX compatible" ect.Click "OK".

Again from "Server Types" click "TCP/IP Settings...". Make your configurations according to the following window.

Unselect "Use IP header compression".

Click "OK" until you return to Dial Up Networking window. (Make new connection and your connection window).

Double click on your connection (METU in our case).

Click "Connect" button.

You will see the following window.

After you connect to the line, you will see the following window.

Type your "user code" and "password" that you you have on CC's central servers.

After your user code and password are validated following window will appear.

Type "ppp" as in the following window.

Press "Enter" on the keyboard.

After you see some garbage characters, press "F7" on the keyboard.

The following window declares that your connection has been established.

Anytime you want to connect to METU systems, just double click your connection on the Dial-Up Networking window and click Connect button. You
can minimize the last window shown above and use Internet programs like browsers, telnet, or ftp programs.

If you would like to use the scripts below you do not need to type "user name","password" and "ppp".
These scripts will type them for you. The usage of these scripts are as follows;

Download "metu-pri.scp" to your computer for 0 822 314 10 14 METU PRI lines.
Download "metu-cs.scp" to your computer for 210 43 00 METU analog lines.

Double click to "My Computer" which is on your desktop.
Double click to "Dial-Up Networking".
Right click on your "METU" dial-up shortcut.
Click on "Properties".
Click on "Scripting".
Click on "Browse".
Choose the right script for your connection.
(metu-pri.scp for 0 822 314 10 14 Metu PRI lines.)
(metu-cs.scp for 210 43 00 Metu analog lines. )
Do not leave "Step through script" box checked.
You may or may not check "Start terminal screen minimized".
Then click "OK"
Right click on your "METU" dial-up shortcut.
Click on "Properties".
Click "Configure" for your modem configurations.
Click on "Options".
Uncheck "Bring up terminal window after dialing".
Click on "OK".
Click on "OK".
Double click on your "METU" dial-up shortcut.
Type your "User Name" and "Password".
Then click on the "Connect".